>
Products >
>
Lighting Controller >
>
>
WELLSEE WS-AL2460 50A 12/24V solar street light controllerWS-AL2460 50A 12/24V solar street light controller
Brand: WELLSEE Dimension: 210*125*50mm Name: Voltage Controller for street lamp Weight: 1.5kg Model: WS-AL2460 Package: 18pcs/carton
WS-AL2460 50A WELLSEE solar street light controller, can intelligently senses the strength of the light outside. It can
automatically open the lamp at dark, and turn to high light automatically after giving the lamp low light for half an hour. And
then turn to morning light when set time is up or at day break. After that, the lamp can be closed automatically after half an
hour (the time of high light can be set.) The time of the high light can be set as you request. Ten hours high light can be set
as full power plus half power light. For example, 4 hours full power light/full light of the bulb and then 6 hours half power/half
light of the bulb, after that morning light until day break, then the controller will turn off the load automatically. This controller
can adjust the light accordingly to save the energy.
WS-AL2460 50A WELLSEE solar street light controller adopts PWM dimmer technology to adjust the light of LED lamps,
can work with different kinds of constant current source. This controller has the advanced characteristics of low cost, simple
maintain, simple connection, easy maintenance, energy saving, reducing surge current and high power factor. Compared
with the ordinary lamp controller, this AL controller can save more than 35% energy.
WS-AL2460 50A WELLSEE solar street light controller adopts PWM charging function, can active the battery, avoid
the sulfide crystals and battery dehydration, so to extend battery life span.
Functions:
1. 12V/24V automatically detection
2. Intelligently senses the light outside, turn on automatically when getting dark and turn off when day break
3. Micro-processing controller pulse-width modulation (PWM) charging
4. Light intensity can be set to save energy consumption, thereby achieving the energy saving effect
5. It can prevent reverse charging (the battery charges the solar panel).
6. Lightning protection, short circuit protection (with self-recovery)
7. It can prevent anti-charging function (solar panels to charge batteries)
8. It can prevent reverse connection of the battery and solar panel.
9. It can set 20 time grade or 10 minutes section modes
10. It has a LET indicator of the working condition of charging and discharging:
One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged strongly; flickeringly
means floating charge, no light means stop charging.
One piece of Load Indicator LED (mark: Light). When it is bright, there is output and load can work; if LED goes out,
means there isnt output and the load cannot work.
Battery indicator: red under =voltage Green =full Yellow =normal
The Parameter Sheet:
Model WS-AL2460 40A WS-AL2460 50A WS-AL2460 60A System voltage 12V / 24V Automatic distinguish voltage Max charge current 40A 50A 60A Charge off voltageHVD 14.4V / 28.8V * Low Voltage DirectiveLVD 10.8V / 21.6V * Low Voltage RestoreLVR 11.8V / 23.6V * Temperature compensation -3mv/°C/cell open circuit losses ≤30mA Light operate light control turn on + light control turn off Light time control Light control turn on/off + time control turn on/off Time control classification 0.5 hours started,half an hour of one grade ,up to 10 hours Ambient temperature -25°C-----+55°C Quiescent dissipation 24mA Control Mode PWM Max loop voltage drop 350 mVAbove-mentioned parameters With * can be determined according to clients special request.
We are special large scale R&D and manufactory enterprise of solar street lamp controller and global supplier of
Wellsee solar controller and photovoltaic system equipment. We also have passed ISO9001, CE and RoHS certifications.
Wuhan Wellsee products can be designed and produced according to clients special request.
Bought notes(bought amounts latest0)
No one bought this product